Instruction for "RoobeeSpray"


1. Program installation.

  • Disable your antivirus software.
  • Save the archive file to any location on the disk.
  • Unzip all files to any location on the disk.
  • Start the program, the first time you will see on the screen the offer to log in. This is a one-time check, in the future authorization will not be required in this window. Enter your Email (the same As you specified when registering on the site) and press "Enter". Enter the "Password" (the same as you specified when registering on the site) and press "Enter".
  • The main authorization window will start, enter your credentials and click "Login". Wait for the main program window to open.

2. Program setting.

  • The "RoobeeSpray" provides setting of hot keys and correction of recoil compensation for each weapon. To change the hotkey, press "Edit", then press the hotkey that you want to change action and press "Enter" when finished.
  • After all the operations with the settings, click "Save". If you do not do this, the next time you start the program, all settings will remain the same.

3. Set up the game.

  • Open the game, go to settings, select the "Control" tab and set the "sensitivity in aiming" to 50.
  • Set "Sensitivity" of all sights to 50. If the sensitivity of the sights will be different from 50, the program will not work properly.
  • Set the "Vertical sensitivity multiplier" to 1. If the target "sensitivity in aiming" and "Vertical sensitivity multiplier" are different from the above values, the "RoobeeSpray" will not work correctly.
  • Set FPS Limit to 60. Do not oscillate FPS, otherwise compensation may it does not work correctly when FPS differs from 60.
    Warning! it is not recommended to use "vertical sync" in graphics settings.

Set the settings according to the images below. Marked * must be installed


4. Usage.

  • Once opened the main window of the program, in order that the program when you press the left mouse button led the cursor down, press the keyboard hotkey "F2" Now, depending on the selected weapon press one of the hotkeys, for example "F4" (UMP9), that the program would know at what speed to compensate for recoil of weapons. Click the left mouse button to check the functionality of the program. If, after pressing the LMB, the cursor "went" down the screen, so everything is in order. To deselect the selected weapon, press the corresponding hot key again, for example "F4" (UMP9), after which the program will not control the cursor (try clicking on the LMB). To disable cursor control, press "F2" again, now even if any weapon is activated, the program will not perform any actions with the cursor. If you have installed a flash hider on the UMP9 (while the program action is active after pressing "F4"), press the "Num1" hotkey on the numeric keypad. After that, the program will extinguish the recoil for weapons UMP9 with u becoming on it flash hider.
    Briefly, the work with the program can be described as follows:
    • Raised some kind of weapon for avtomaticheskoy shooting, press the appropriate hot key.
    • Mounted on these weapons some kit, clicked on the appropriate hot key.
    • After the match is over, before starting a new one, you can double click on "F2" (All previous settings will be reset).
    When you change weapons, just press the appropriate hot key.

5. Default hot keys.

  • "F2" - on/off cursor control + resets all previous settings.
  • "TAB" - on/off cursor control (does not prevent to get lost during open inventory). Does not reset all previous settings.
  • "i" - on/off cursor control (does not prevent to get lost during open inventory). Does not reset all previous settings.
  • "M" - on/off cursor control (does not interfere with the map). Does not reset all previous settings.
  • "F3" - on recoil compensation for AKM.
  • "F4" - on recoil compensation for UMP9.
  • "F5" - on recoil compensation for SCAR-L.
  • "F6" - on recoil compensation for M416.
  • "F7" - on recoil compensation for Vector.
  • "F8" - on recoil compensation for QBZ.
  • "F9" - on recoil compensation for Beryl m762.
  • "F10 " - pauses the program. Does not reset the selected modifications and weapons. Cancels the effect of the key "G"
  • "Num1" - on/off Flash Hider.
  • "Num2" - on/off Compensator.
  • "Num4" - on/off Vertical Foregrip.
  • "Num5" - on/off Half Grip.
  • "Num7" - on/off sight X2.
  • "Num8" - on/off sight X3.
  • "Num9" - on/off sight X4.
  • "LeftShift" - correction of recoil compensation (compensation with pressed shift and not pressed different).
  • "G" - turns off cursor control until the "1" or "2" or "3" or "4" or "LBM" keys are pressed (allows you to aim normally when throwing grenades).
  • "6" - turns off cursor control until the "1" or "2" or "3" or "4" or "LBM" keys are pressed (allows you to aim normally when throwing a Stun grenade).
  • "7" - turns off cursor control until the "1" or "2" or "3" or "4" or "LBM" keys are pressed (allows you to aim normally when throwing Smoke grenades).
  • "1" or "2" or "3" or "4" - cancels the action of the "G", "6", "7" hotkey.
  • "1" or "2" - depending on the settings, activates the pause mode. Only one of these keys can be assigned. Works similarly to the F10 key
  • "SPACE" - switches the firing mode to " standing position".
  • "C" - switches the shooting mode to "a sitting position" if the activated mode of "standing" and Vice versa, if the mode is active "sitting position" switches the shooting mode to "standing position".
  • "[" (Pix-) - allows you to be right in the game to adjust the compensation returns in a big way. Each next press will increase the effect.
    Important! The setting is saved between on / off of the program and acts separately for each attachment and their combinations.
  • "]" (Pix+) - allows you to be right in the game to adjust the compensation returns to the smaller side. Each next press will increase the effect.
    Important! The setting is saved between on / off of the program and acts separately for each attachment and their combinations.

6. Notes.

  • It is strongly recommended to disable anti-virus programs while the program is running.
  • In case of any problems, please contact us at: Support